1pc Power Steering Grar Rack And Pinion 26-2719 Compatible For Honda Pilot 2003-2008 Car Accessories Parts Suspension And Steering

1PC Power Steering Rack and Pinion Compatible For Honda Pilot 2003-2008 26-2719 Product SpecificationsSize: 115x26x17(cm)Weight: 10.2kgMaterial: Steel/AluminumColor: BlackPlacement on Vehicle: FrontInput Shaft Diameter(in): 0.68inInput Shaft Length(in): 1.81inPressure Port Thread Size: M14*1.5Return Port Thread Size: M16*1.5Number of Mounting Holes: 2Distance Between Mounting Holes (in): inRack Length (in): 43.94inOEM/Interchange Part Numbers53601-S9V-A01, 53601S9VA01, 26-2719FitmentCompatible For Honda Pilot 2003-2008 All Engine w/ Hydraulic Power SteeringFeaturesBuilt to strict quality control standards factory testedIATF16949Easy Installation, Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) StandardsHigh PerformanceThe steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer.2 in 1 FunctionConversion of the steering wheel's rotationalmotion into the linear motion needed for thevehicle's wheels to turnReduction of gears, which makes it easierfor the steering wheel to turn the wheelsPremium MaterialWith the premium aluminum alloy and steel construction, this steering rack assembly has a great anti-rust and anti-corrosive quality for its long service life.We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation.Humanized DesignEnsure a tight seal and smooth steering operation. The hydraulic lines are fully fluid tested at high pressure. And the steel clamps and rubber bellow boots improve steering efficiency.Package Include1PC Power Steering Rack and PinionAttention1. Correctly select the model and size of the steering gear: The model and size of the steering gear must be consistent with the original parts of the vehicle, otherwise it will affect the steering sensitivity and stability;2. Clean the surrounding area first: Before replacing the steering gear, it is necessary to thoroughly clean the surrounding area to prevent small debris residues from damaging new steering gear components;3. Correct disassembly and assembly of the steering gear: When disassembling an old steering gear, be particularly careful to avoid damaging the original vehicle components, and lubricate the bearings and gears during installation;4. Use of high-quality steering oil: For hydraulic power assisted steering machines, high-quality steering oil is required;5. Correctly adjust the wheel angle: After replacing the steering gear, it is necessary to adjust the wheel angle to ensure vehicle stability and safety;6. Attention to maintenance: Regularly inspect and maintain steering gear components to ensure good operation of the steering gear.NoteOil leakage: The oil seal in the steering gear can break due to aging and wear, resulting in loss or leakage of hydraulic oil. Oil leakage can cause difficulty or malfunction in steering operation.Abnormal noise: A snap, noise, or hiss may be caused by worn steering gear, pin shaft, or rack.Excessive steering force: Blockage or wear of the steering gear oil pipes or passages can cause excessive hydraulic oil pressure, excessive steering force, or even steering failure.Steering failure: Steering failure can be caused by reasons such as damage to the steering gear, blockage in the oil circuit, and failure of the oil pump, which will affect driving safety.Shake or shake: Worn or loose parts in the steering gear can easily cause the vehicle to shake or shake during steering.Dead center: When turning, if the steering wheel needs to be rotated for a long time until the vehicle turns significantly, this may be a dead center problem with the steering gear.Welcome! This is the gathering place for car enthusiasts. From performance upgrades to exterior makeover, everything is covered in one place!

• The steering command response is without delay, and the control feels smooth and linear.
• It is designed to be adaptable to various driving conditions. Whether it's urban commuting or mountainous terrain off-road, the steering damping is automatically adjusted to balance comfort and stability.
• It can operate stably in high-temperature and high-altitude environments, with the working temperature range covering -40℃ to 120℃. Its performance remains unaffected even under adverse weather conditions.
• After turning, it automatically returns to the correct position without any deviation. When driving in a straight line, it does not veer off course.
• 1pc Power Steering Grar Rack And Pinion 26-2719 Compatible For Honda Pilot 2003-2008 Car Accessories Parts Suspension And Steering